Injection Mold Tooling

Posts Tagged ‘plastic’

plastic injection mold tooling:

Injection Mold Tooling

Question by Rani8326: how do I use my full potential as a mechanical engineer in a Tool Room in plastic industry?
I want to know how can I use my my full potential as a plastic injection mould making pofessional ?

Best answer:

Answer by cheyenne95129
A ME doesnt belong in a tool room in a plastic injection house.
If you cant find a job at a OEM and you have to be at the “squirt house” you can design better tools . Remember multiple cavities, flow of coolant and ejection methods.
Most Plastic houses use unskilled workers to operate the presses so you must out guess what they will do, ( or NOT do…). Otherwise the next day you will have a truckload of bad parts and lose money. My experience is that short shots and such are not detected by operators that are focused on quotas of parts. start slow. Learn from the experienced toolmakers..Good Luck

Know better? Leave your own answer in the comments!

Injection Mold Tooling

More than 20 years of experience, Intertech provides a very great integrated operational ability from design to production of molds 100% made in Taiwan. Except having our own mold making factory, we also cooperate with our team vendors to form a very strong working force in Taiwan. For overseas market,we work very closely with local representative to take care of the technical communication and after-sale service to our customersWe also participate the EUROMOLD exhibition and meet our customers every year in Europe. With concentrating on mold “niche market”, we play a very useful mold maker role from Far East whenever customers wants to develop their new projects from A to Z with the most economic cost and effect basis. We make plastic injection molds, die-casting molds, silicone rubber molds, liquid silicone rubber molds, LSR molds, rubber molds, press molds and hot runner molds (Husky, MoldMaster, MasterFlow, LKM, Incoe systems…etc)We are especially good in dealing the undercut molds, unscrewing molds, core pulling structure molds, high gloss polishing molds, interchangeable core molds, hot compression mold, 2 components injection molds and the pilot molds for small series production…etc. www.taiwanmoldmaker.com
Video Rating: 3 / 5

Hymid excel in single and two shot injection moulding, injection mould toolmaking, design and special purpose machine fabrication services to a global market, supported by UK and overseas mould tool manufacture. Operating to ISO9001 quality standards. Our Engineering team has many years of experience in moulding and tooling and we will be happy to discuss your new or on-going projects to find the solution that fits your needs.
Video Rating: 0 / 5

Providence Enterprise is a Hong Kong contract manufacturer / mold maker located in Shenzhen, China, and has been in business since 1992. We specialize in electromechanical assemblies and pump/motor related products. We are an engineering focused company and our capabilities include design, tooling, injection molding, SMT, and final goods assembly. Providence is an ISO, UL, and FDA-registered manufacturer. We have also worked to achieve international industrial standards such as: · ISO 13485:2003 · cGMP Compliance (in process) · FDA Registered · ISO 9001:2000 · ISO/TS 16949:2002 · ISO 14001 · UL 746 Our website is www.providence.com.hk

plastic injection mold tooling:

Injection Mold Tooling

Question by dave@{plastisolve.com: How can i get my business “plastisolve” seen and used by the right business people ?
Our new company is called PlastiSolve and as the name suggests we have solutions to your plastic problems.From Concept to Construction.We have 10 years of experience within the plastic manufacture & fabrication industry.We specialise in quality manufacturing in most mediums. Primarily plastic, but also wood & metal.Fast & accurate pattern making has also been an advantage to us as well as our customers.We excel in complex electro mechanical design work & have a close relationship with a neighbouring electronics company.Due to this relationship we can also offer our customers electronic expertise & circuit design capabilities.We can offer the following services:CNC Routing/Engraving,Vacuum Forming, Fabrication ,Injection Moulding,Tooling & Prototyping,Bespoke one off items,Mass Production and much more…
Products we have recently produced are:
Grab a Grand Tanks,Catering Equipment, Acrylic Furniture,Point of Sale,Retail Displays, Detox products,Corporate Games. www.plastisolve.com

Best answer:

Answer by jeebus1486
Sounds like you need to hire someone as a sales lead/marketing guy. Find someone who has a lot of experience IN THE INDUSTRY – this person will have the contacts that you need to get your product seen. Set up your website to start advertising and get your name out there. Good luck!

Give your answer to this question below!

Injection Mold Tooling

plastic injection mold tooling:

Injection Mold Tooling

Question by areena666: What is the easiest and cheapest way to get tooling or moulds made for a short run production?
Our concept design for a new cap closure is nearly finished and we will soon have a few functioning prototypes shortly. However before we go into mass production we feel it will be best to pilot or market test our products to a group of people, our friends and also potential clients.

In order to do this I have been told it may be possible to go to a plastic injection firm and request a short run production..lets say 1000 – 5000 samples

However tooling may be needed….. soft tooling or hard steel tooling..
We are UK based and i have also been advised of not considering China as it is not exactly on our door step if something goes wrong..

Please advise:)

good point..i think i need to rephrase my question…

i have been told nowadays that any form of tooling or moulds can be built but the costs can raise from 1000 up to 100 000……

cheapest – by this i mean cost effective…it is only for samples etc not for mass production

so this for example could be a soft tool, like aluminium,

easiest – i mean by this, maybe there could be a a method I am not aware of…..a simple solution….

Best answer:

Answer by onebear469
why do u think the easiest way would be the cheapist?

Give your answer to this question below!

Injection Mold Tooling

plastic injection mold tooling:

Injection Mold Tooling

Question by moonraker_dream: can I find a job 4 plastic-molding m/cs mechanical maintenance engineer with experience of 30 yrs.thks v mch.?
good experience in repair & maintenance of mechanical /hydraulic operated systems used in:injection ,blow, extrusion 4 pvc pipes& ps sheets (4 yugurt cups) ,theromforming m/cs,thermoset matls presses.
maintenance of all related auxiliary equipements such as:crushers
,mixers,air-compressors (recprocating/rotary/screw types),water cooling towers,cooling water centrifugal pumps stations,bore-hole submersible pumps,chillers as well.
maintenance of material handling equipments as:hoisting cranes
(electrical&pneumatic controlled),telescopic-boom cranes,trucks,
pallets,fork-lifts,&stackers.
mechanical workshop m/c tools.
core-pulling split-designed moulds 4 crates ,chairs, tables..etc.
thoro’ knowledge of[ arabic,english,french ,tech.german language]
computer ms office[windows xp,word xp,excel xp,access,internet,
powerpoint xp]in addition to[AutoCAD 2D/3D]
HARDWORKING &DEDICATED with TRAINING SKILLS.
Spare parts [mech.&hydr.]compilng &storing SKILLS 4 all the A.M M/CS

Best answer:

Answer by matt_archbold2002
dude if you can’t find a job on your own with all that experience that you say you have, then you’re not trying hard enough.

Give your answer to this question below!

Injection Mold Tooling

plastic injection mold tooling:

Injection Mold Tooling

Question by cupcake: Combination or Permutation Question?
Plastic parts produced by an injection-molding operation are checked for conformance to specifications. Each tool contains 12 cavities in which parts are produced, and these parts fall into a conveyor when the press opens. An inspector chooses 3 parts from among the 12 at random. Two cavities are affected by a temperature malfunction that results in parts that don’t conform to specifications.

a) what is the probability that the inspector finds exactly one nonconforming part?
b) what is the probability that the inspector finds at least one nonconforming part?

You don’t have to do the second part if you don’t want to. I can do it if someone shows me how to do part (a).
Thanks for any help

Best answer:

Answer by holdm
there are 12C3 = 220 ways for the inspector to pick 3 parts to check.
When exactly one of these three is bad: there are 2 ways to pick the bad part and 10C2 = 45 ways to pick good parts. 2*45/220 = 9/22

b) the probability that the inspector checks only good parts is 10C3/12C3 = 120/220 = 6/11
therefore the probability that he finds at least one bad is 1 – 6/11 = 5/11

Know better? Leave your own answer in the comments!

Injection Mold Tooling

This mold was created for my Mold Design class with Mark Hill at Ferris State University. Here are some of the Specs: – 4 Cavities – 3 Lifters per Cavity – Slide Locks – Accelerated Ejectors – Guided Ejection – Date Stamp and Recycle Stamp Inserts Check out JakeDrews.Com for more of my projects

Robotic deburring of an injection molded plastic part with ATI’s RC-340 Compliant Deburring Tool. SR-131 Collision Sensor protects valuable robot tooling from robot crashes. QC-41 Robotic Tool Changers enable the robot to switch end-effectors automatically. Visit www.ati-ia.com for more information.
Video Rating: 0 / 5

OUR SERVICE (www.cnmoulding.com for details) 1.Various mold& tool maker ,sepcially full hardened mould 2.Industry assistant design 3.Steel Insert Molding ,Overmolding(soft touch) 4.Plastic Injection Molding, Assembly & Packaging 5,FDA Registered Molding Facility – Machines…
Video Rating: 3 / 5

This tool makes the plastic case of a handheld information device, its a simple two plate mold with a cold runner and an ordinary ejection system.